Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 144)

08.
03
Han
AV
Han E ® AV / Han ® ES AV Details
Possibilities in switch cabinet The terminal block connectors can be supplied for left hand or right hand
applications. Hence the ground and connecting terminal for contact no. 1 will
always be accessible from above in both types of installation.
Left or right hand mounting in the switch cabinet,
therefore allows use of the same pre-prepared
interface cable
left hand
version
right hand
version
Terminal block con-
nector
Han E ® AV,
Han ® ES AV
Internal use on standard rails in the switch
cabinet in conjunction with Han-Snap ®
versions for rail
mounting
Assembly of terminal block connectors Male or female insert Housings bulkhead mounting
The terminal block connector is fixed in the stan-
dard bulkhead housing in the normal way.
Han E ® AV and Han ® ES AV with 16 and 24 pins
can be mounted from the inside of the switch ca-
binet into standard bulkhead housings. Therefore
pre-assembly is possible.
Standard bulkhead housing Terminal block connector Han E ® AV
Identification
The individual terminals have the same identifica-
tion as on the mating face. In addition each circuit
may be separately labelled with identification strips
fitted in the adjacent slots.
Counterparts
For suitable mating inserts of series Han E ® and Han ® ES with screw, cage-
clamp or crimp terminals please refer to the chapter 03.