RKI Instruments Data Cal 2000 - Manual (Page 42)

37 • Setting Up the Data Cal 2000 Software
• The GAS 1 solenoid which controls the Gas 1 fitting is assigned to
Cylinder 0001 which is RKI 4-gas mix 81-00154RK-02.
• The GAS 2 solenoid which controls the Gas 2 fitting is assigned to
Cylinder 0002 which is RKI 50% volume CH4 cylinder 81-0013RK-
05.
• Solenoids GAS 3, GAS 4, and GAS 5 are unassigned.
If you define additional cylinders and wish to assign them to unassigned
solenoids or wish to change the solenoid assignments:
1. From the main program window, click the Solenoids button located
along the top of the window. The Solenoids window appears.
2. Click in the Cylinder Name field of an assigned solenoid or an
assigned solenoid whose assignment you what to change.
3. A drop down arrow will appear in the solenoid position on the far
right.
4. Click on the drop down arrow. A list of defined cylinders will appear.
5. Select the cylinder you want assigned to that solenoid.
6. Click the Apply button to make this change.
7. Repeat steps 2 - 6 for any additional assignments you want to
make.
8. When you are done making assignments, click the OK button. A
confirmation window will appear.
9. Click Yes to save the changes. You will return to the main program
window.