RKI Instruments Data Cal 2000 User Manual
Page 52
Advertising
47 • Calibrating Instruments
If the instrument or instruments failed the calibration, then the
following indication is given.
5. To close the result window, click the OK button. For a failed
calibration, if you want to view the test results for each channel,
double click on an instrument in the result window and the software
will take you to the Calibration area of the Logs window where the
data for this calibration is saved.
6. After a calibration, the docking modules and instruments will be
automatically displayed in detail format.
Figure 26: Calibration Fail Indication
Advertising