RKI Instruments Data Cal 2000 - Manual (Page 9)

Description • 4
Description
The Data Cal 2000 consists of the following components:
• Data Cal 2000 Docking Station
• DM-2001 Docking Module for GX-2001
• DM-2003 Docking Module for GX-2003
• DM-2009 Docking Module for GX-2009
• RS-232C serial communication cable for connection of the docking
station to a computer
• RS-485 serial communication cables for connection of the docking
station to a docking module and for daisy chain connection of
additional docking modules to each other
• Power cord
• A 4-gas mix calibration cylinder (optional)
• Demand flow regulator with 3 foot tube (optional)
• 10 ft. exhaust tube
• A Windows based PC compatible computer (user supplied) with the
Data Cal 2000 Docking Station Software loaded
The docking station is designed to be used on a table top with the DM-
2001, DM-2003, and/or DM-2009 docking modules extending to the right
of the docking station as shown in Figure 1 below. Any combination of
docking modules may be used up to a total of 10. If a laptop computer is
used, it may be placed on top of the docking station if desired.
Docking Station
Up to 10 docking m odules m ay be installed in any
combination of DM-2001's, DM-2003's, and DM-2009's.
DM-2009
DM-2001 DM-2003
POWER FAULT
Data Cal 2000
Figure 1: Data Cal 2000