RKI Instruments Data Cal 2000 - Manual (Page 78)

73 • Instrument/Module Function Menu
Open Function
This function can be activated by either right clicking an instrument
and selecting Open(O) when the pull down menu appears or by
selecting an instrument and then using the alt/O key combination.
The Open function brings up the Instrument Information window for
viewing only. No changes can be made with the Open function. The
Instrument Information window consists of the Parameter Setting tab
and the Sensor Setting tab. The Parameter Setting tab shows
various instrument parameters such as serial number, station ID,
user ID and calibration interval. It also includes a Memo field.
The Sensor Setting tab includes various channel parameters such
as the alarm points for each channel, the autocal gas concentration,
and the last calibration date. There are also two buttons that are not
selectable in Open mode, the Load Factory Defaults and Load
User Defaults buttons. These buttons become selectable in Edit
Figure 46: Instrument Information Window, Parameter Setting Tab