RKI Instruments Data Cal 2000 - Manual (Page 55)

Logs Window • 50
NOTE: If the GX-2009 is left in the DM-2009 for a long period of
time, the dock pump will run for 12 seconds every 2
minutes in order to keep excess hydrogen generated
from the NiMH batteries from affecting the CO sensor.
Logs Window
Viewing Data
You can view alarm trend data, calibration data, event data, interval trend
data, memos, and bump test information in the Logs window. To enter the
Logs window, click the Logs button from the main program window.
When viewing the data, it can be organized in two ways:
1. Base View Format
Neither of the Serial No, Station ID, or User ID selection boxes in
the lower left of the window are selected and the Base box appears
next to these selection boxes. The data can be organized by either
the data type or by the month and year.
Figure 27: Logs Window in Base Viewing Format