RKI Instruments Data Cal 2000 - Manual (Page 80)

75 • Instrument/Module Function Menu
Load User Defaults buttons in the Sensor Setting tab. To change any of
the items in either of the two tabs’ fields:
1. Put the cursor in the field you want to update and change the
setting. Repeat this for any additional fields you want to update.
To deactivate or activate a sensor, click in the right side of the
desired sensor field and a pull-down arrow will appear as shown in
Figure 47 (CH4 channel shown) which will allow you to select a gas
name or “---”. If you select “---”, the channel will be deactivated if
you save the change.
If you want to automatically load the factory default values or the
user default values in the Sensor Setting tab, click either the Load
Factory Defaults or Load User Defaults button. See
"Configuration Window", “Parameter Tab” on page 78 for a
description of these defaults and how to edit the user defaults.
2. Click the OK button in the lower right corner of the Instrument
Information window.
3. A confirmation box will appear. Click the Yes button.
4. The software will make the change or changes in the connected
instrument and return to the main program window.
To load the factory or user default values for the items in the Sensor
Setting tab, click the Load Factory Defaults or Load User Defaults
button. The values loaded for each button are defined in the Sensor tab
of the Configuration window (see “Sensor Tab” on page 80).
Edit Function, Memo Entry
The Data Cal 2000 includes a memo feature that allows you to enter
remarks for an instrument that is connected to the software. The memo
may be used to document anything of interest, such as maintenance
records (noting when a sensor was changed or a battery pack changed).
To enter a memo, activate the Edit function to bring up the Parameter
Setting tab as described above in "Edit Function" and perform the
following:
1. Place the cursor in the Memo field. If a memo has been previously
entered, it will still appear in the Memo field.
2. If necessary delete the old memo. Enter the information you wish to