RKI Instruments Data Cal 2000 - Manual (Page 76)

71 • Logs Window
month will be listed below the Bump test folder. Click the folder
whose contents you want to view and the bump test files in it will be
shown in the upper right side of the Logs window.
3. Files that record a failed bump test on all channels are highlighted
in red. Files that record a bump test where not all channels passed
are highlighted in orange.
4. To view the file in summary format, click on the bump test file in the
upper right part of the Logs window that you wish to view. The
bump test information in the file will appear in the lower right part of
the window in summary format. It includes the instrument’s serial
number, station ID, user ID, bump test time, and gas readings
during the bump test.
5. To print all the bump test files in the upper right window, click the
Bump test & Calibration Report button above the files. A dialog
box will appear confirming if you want to print. Click OK.
6. To go back and view other data, click the Close button to return to
the Logs window.
Figure 44: Bump Test Files in ID View Format