RKI Instruments Data Cal 2000 - Manual (Page 68)

63 • Logs Window
be adjusted with the DataCal 2000 software in the Parameter Tab as
described in “Setting Up the Configuration” on page 28. At the scheduled
log time, the GX-2003 also saves the average readings of the previous
interval period. The log time will depend on how many times the GX-2003
is turned on and off and how many events such as gas alarms occur.
The GX-2009’s data logging interval is user adjustable through the
GX-2009 User Setup Program, the GX-2009 Data Logger Management
Program, or the Data Cal 2000 Software. See the GX-2009 User Setup
Program Operator’s Manual or the GX-2009 Data Logger Management
Program Operator’s Manual for instructions on how to adjust the data
logging interval. At the scheduled log time, the GX-2009 also saves the
average readings of the previous interval period. The log time will depend
on how many times the GX-2009 is turned on and off and how many
events such as gas alarms occur.
To view and perform desired operations with the interval trend files:
1. While in the Logs window, open folders in the left side of the
window until the Interval folder you wish to open is visible.
2. If you are viewing data in base view format with the data organized
by type, expand the Interval folder. Folders organized by year/
month will appear below the Interval folder. Click on the folder
whose contents you wish to see. The interval trend files in the
folder will be shown in the upper right side of the Logs window.