RKI Instruments Data Cal 2000 - Manual (Page 65)

Logs Window • 60
3. Files that record a failed calibration on all channels are highlighted
in red. Files that record a calibration where not all channels passed
are highlighted in orange.
4. To view the file in summary format, click on the calibration file in the
upper right part of the Logs window that you wish to view. The
calibration information in the file will appear in the lower right part of
the window in summary format. It includes the instrument’s serial
number, station ID, user ID, calibration time, and gas readings
during the calibration.
5. To print all the calibration files in the upper right window, click the
Bump test & Calibration Report button above the files. A dialog
box will appear confirming if you want to print. Click OK.
6. To go back and view other data, click the Close button to return to
the Logs window.
Figure 34: Calibration Files in ID View Format