RKI Instruments Data Cal 2000 - Manual (Page 66)

61 • Logs Window
Event Data
The GX-2003 and the GX-2009 save events such as gas alarms,
calibration failures, and sensor failures. These events are saved as files
in the Logs window. The files indicate the instrument, time of the event,
and event type. The Data Cal software does not save event data
separately for GX-2001’s, but the events saved by a GX-2001 are
viewable in the interval trend data. To view and perform desired
operations with the event files:
1. While in the Logs window, open folders in the left side of the
window until the Event folder you wish to view is visible.
2. If you are viewing data in base view format with the data organized
by type, expand the Event folder. Folders organized by year/month
will appear below the Event folder. Click on the folder whose
contents you wish to see. The event files in the folder will be shown
in the upper right side of the Logs window.
If you organize the data by date, then folders organized by year/
month appear in the left side of the window. Expand the folder you
want to see and click on the Event folder. The event files will
appear in the upper right side of the window.
If you are viewing data in ID view format, expand the files in the left
side of the window until the Event folder you wish to view is visible.
Figure 35: Event Files in Base View Format