RKI Instruments Data Cal 2000 - Manual (Page 77)

Instrument/Module Function Menu • 72
Instrument/Module Function Menu
When you are in the main program window, if you right click on an
instrument or a docking module, the Instrument/Module Function menu
appears.
The functions in the Instrument/Module Function menu are Open, Edit,
Download, Clear Logs, Reset, and Power Off. If you right click on an
instrument that is currently connected to a module, all items in the
Instrument/Module Function menu are selectable as shown above in
Figure 45 if the Change Parameter selection box in the Instrument
Information section of the Configuration window Parameter tab is
selected. If it is not selected, the Edit function is not selectable. If you
right click on an instrument that is not currently connected to the Data Cal
2000, only the Open function is active. If you right click on a module that
does not have an instrument in it that is connected to the Data Cal 2000,
only the Reset function is active.
Figure 45: Instrument/Module Function Menu