RKI Instruments Data Cal 2000 - Manual (Page 82)

77 • Configuration Window
NOTE: If communication errors for a module or improper
operation of a module continue after resetting the
module, verify that the terminator switch has been set
properly in the down position for the last module in the
system and that all the other modules have the
terminator switch set to the up position.
Power Off Function
This function can be activated by either right clicking an instrument that is
connected to the Data Cal 2000 and selecting Power Off(P) when the pull
down menu appears or by selecting an instrument that is connected to
the Data Cal 2000 and then using the alt/P key combination. The Power
Off function turns off the selected instrument. If you select Power Off, a
confirmation box appears. Click the OK button to proceed with clearing
all the data from the instrument.
Configuration Window
The Configuration window is accessible from the main program window
by clicking on the Config button. The Configuration window is password
protected. It includes four tabs, the Parameter tab, the Database tab, the
Sensor tab, and the Password tab, which allow you to do the following:
• Configure system parameters for the Data Cal 2000 in the
Parameter tab.
• Create a new database, import data, export data, and delete data in
the Database tab.
• View the factory defaults and update the user defaults for sensor
settings in the Sensor tab.
• Change the password in the Password tab.
To enter the Configuration window:
1. From the main window, click on the Config button located along
the top of the window.