Operation – RKI Instruments Eagle Series User Manual
Page 16
Diffusion Eagle Instruction Manual
Operation • 11
Operation
The Eagle has four operating modes: normal operating mode, display mode,
setup mode, and calibration mode. This section describes the Eagle in normal
operating mode. It includes procedures to start up the Eagle, set various
detection options for the combustible gas channel, and shut down the Eagle.
NOTE: The screens illustrated in this section are intended as examples only.
The screens displayed by your Eagle model may be slightly
different.
Starting Up the Eagle
1. Connect the Remote Detector either directly to the Eagle or use the 20-
foot or 50-foot extender cable. To make this connection, follow these
steps:
•
Find the connector for the Remote Detector on the front end of the
Eagle’s bottom case assembly.
Eagle
Connector