RKI Instruments Eagle Series - Manual (Page 44)

Diffusion Eagle Instruction Manual Setup Mode • 39
Updating the Alarm Silence Setting
NOTE: This feature works only when Alarm Latching is turned on.
With Alarm Silence ON, pressing the RESET/SILENCE button silences the
buzzer when the Eagles goes into alarm. The LEDs continue to flash, and the
display continues to show the level of alarm.
With Alarm Silence OFF, you cannot silence the buzzer.
1. From the main menu, select the ALARM SILENCE menu option.
2. Press the AIR/ ▲ or SHIFT/ ▼ button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to the
main menu.
Turning the User ID Function On or Off
With User ID Input ON, the User and Station ID screen displays during start
up. From this screen, you can enter user, location, or other information at the
beginning of each gas detection session (see page 23).
With User ID Input OFF (default), the User and Station ID screen does not
display during start up.
1. From the main menu, select the USER ID menu option.
2. Press the AIR/ ▲ or SHIFT/ ▼ button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to the
main menu.
I
N
A N S E R M L L
O
A C E
R
F
T D E I S U E
F
S
I N P U T
O