RKI Instruments Eagle Series - Manual (Page 46)

Diffusion Eagle Instruction Manual Setup Mode • 41
Updating the Back Light Setting
This setting indicates the length of time the LCD illuminates when you press
any button. The minimum setting is off; the maximum setting is 10 minutes.
The default setting is 15 seconds.
1. From the main menu, select the LCD BACK LIGHT TIME menu option.
2. Press the AIR/ ▲ and SHIFT/ ▼ buttons to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to the
main menu.
Turning the Auto Fresh Air Function On or Off
WARNING: If Auto Fresh Air Adjust is ON, you must start the Eagle in a
“fresh-air” environment. If this setting is ON and the Eagle is
started in the presence of a target gas, the readings and alarms
will not be accurate or reliable.
With Auto Fresh Air Adjust ON, the Eagle automatically set the fresh air
reading for all channels during the start-up sequence.
With Auto Fresh Air Adjust OFF (default), you must press the AIR/ ▲ button
to set the fresh air reading for all channels.
1. From the main menu, select the AUTO FRESH AIR/ ▲ ADJ. menu
option.
2. Press the AIR/ ▲ or SHIFT/ ▼ button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to the
main menu.
K
5
D G C I A B C
C
L
S
T I M E
E
L H T
1
S D
F
E R H I F R A O
F
T J A A U .
O