Updating the confirmation beep setting, Returning to default settings – RKI Instruments Eagle Series User Manual
Page 49
44 • Setup Mode
Diffusion Eagle Instruction Manual
Updating the Confirmation Beep Setting
With Confirmation Beep ON, the Eagle beeps once every 15 minutes to
verify that it is operating.
With Confirmation Beep OFF (default), the Eagle does not sound a
confirmation beep.
1. From the main menu, select the CONFIRMATION BEEP menu option.
2. Press the AIR/
▲
or SHIFT/
▼
button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to the
main menu.
Returning to Default Settings
Each of the parameters in Setup mode has a default setting. The Eagle
includes three different options for returning default settings: reset all default
settings, reset the default alarm point settings only, and reset the default
oxygen zero setting only.
CAUTION:
If you reset all default settings, any changes made in
setup mode or normal operation, including calibration
settings, will be lost.
To reset all default settings:
1. From the main menu, select the DEFAULT menu option.
2. Press the POWER/ENTER button to display the Set Default All screen.
3. Press the AIR/
▲
button to reset all parameters to their default settings.
The messages SAVING DATA and END display, then the main menu
displays.
A
E
F
M
N
T I
I R
O
N
F
O
P
E
F
C
O
B
A
F A
N
I
Y E S
D
U
A
:
R
S
I
D
L
T
E
O
P
:
L A Y
L
S E
T
L