RKI Instruments Eagle Series - Manual (Page 17)

12 • Operation Diffusion Eagle Instruction Manual
• To attach the Remote Detector directly to the Eagle, position the
Remote Detector coupling in the unlocked position as shown below.
Then line up the tab inside the connector on the Remote Detector
with the notch inside the connector on the Eagle. Gently push the
Remote Detector toward the Eagle. Turn the coupling clockwise on
the connector of the Remote Detector to secure the Remote Detector
to the Eagle’s bottom case assembly.
Locked Position
Locked Position
Coupling shown in
Unlocked Position,
Counterclockwise to Locked