RKI Instruments SDM-2012 Standalone Configuration - Manual (Page 103)

Using the Single Module Data Viewer Program • 98
Organizing the Data
When viewing the data, it can be organized in two ways:
1. Base View Format
In base view format, neither of the Serial No, Station ID, or User ID selection
boxes in the lower left of the window are selected and the Base box appears
next to these selection boxes with two radio buttons. The data can be
organized by either the data Type (bump test and calibration data) or by Date
(year and month). The example below shows the data organized by Type.
Figure 51: Data in Base Viewing Format