RKI Instruments SDM-2012 Standalone Configuration - Manual (Page 64)

59 • Bump Testing a Gas Tracer
charge LED was amber, it will begin to blink green.
NOTE: The screen above applies to a standard Gas Tracer with a %volume
combustible gas sensor installed. All screens in this section will be
shown for a standard Gas Tracer as well as a standard Gas Tracer with
a %volume combustible gas sensor installed.
9. There are three exceptions to the sequence described above in step 6 above.
See the Gas Tracer Operator’s Manual for a description of the L./B. MODE,
CL RMNDR, and CL EXPRD instrument parameters.
• When L./B. MODE is set to anything but OFF, the Normal Mode Select
Screen will appear.
Press and release the POWER ENTER button on the Gas Tracer. If you do
not press the POWER ENTER button for 20 seconds, the instrument will
automatically continue its warm up sequence in Normal Mode.
50
12.0
50
25.0
%
ppm
ppm
CH
4
O
2
CO
H
2
S
TRANSMIT
%LEL
1000
12.0
50
25.0
%
ppm
ppm
CH
4
O
2
CO
H
2
S
TRANSMIT
ppm
100
12.0
50
25.0
%
ppm
ppm
CH
4
O
2
CO
H
2
S
TRANSMIT
vol%
0
20.9
0
0.0 vol%
%LEL
%
ppm
ppm
CH
4
O
2
NORMAL ?
CO
H
2
S