RKI Instruments SDM-2012 Standalone Configuration - Manual (Page 32)

27 • Setting the Operational Parameters in Edit Mode
4. Press and release the EDIT ENTER button. The current gas inlet setting will
be displayed.
5. To edit the gas inlet setting, press and release the EDIT ENTER button. An “E”
will appear to the left of H2S--IN.
6. Use the BUMP
T
and CAL
S
buttons to scroll between GAS1 and GAS2.
7. Once you have made your selection, press and release the EDIT ENTER
button. The “E” to the left of H2S--IN will disappear.
8. Use the BUMP
T
button to scroll past the tested sensors setting. The screen
will indicate that the parameter changes have been saved.
The GX-2012 will return to the home screen.
GAS 1
H2S--IN
GAS 1
E H2S--IN
GAS 1
Std
DECISION