RKI Instruments SDM-2012 Standalone Configuration - Manual (Page 108)

103 • Using the Single Module Data Viewer Program
appear showing the selected printer and confirming if you want to print. Verify
that the selected printer is correct and click OK.
8. To print the complete results, pass/fail and gas readings, of one of the files in
the upper right part of the data view window, click on one of the files to select it
and then click the print button that appears above the file details in the lower
right. A dialog box will appear showing the selected printer and confirming if
you want to print. Verify that the selected printer is correct and click OK.
9. To save files as they appear in the upper right part of the data view window,
click the Save To File button to the right of the print button in the upper left
corner of the window. The Save To File button has a floppy disk icon in it. A
“Save As” dialog box will appear for you to specify the filename, file location,
and file type. Select the Text files (*.csv) choice to save the information as a
comma separated value file that may be opened with a spreadsheet program
such as Microsoft Excel.
10. To save files to the clipboard as they appear in the upper right part of the data
view window, click the Copy To Clipboard button. The Copy To Clipboard
button has a clipboard icon in it. The file will be saved to the clipboard. It can
then be pasted into a document by using the Paste command in an
application.
Deleting Data
You can delete an instrument, bump test data, or calibration data in the data view
window. The delete function is password protected to avoid accidental deletion of
instruments or data. To delete an instrument or data, perform the following:
1. Find the item you wish to delete and right click it. A window will appear that
says “Delete(D) Change Password(C)”.
2. Click on “Delete(D)”. A password entry window will appear.