Rockwell Automation 20D PowerFlex 700 Installation Instructions - Frames 7…10 - Manual (Page 27)

Rockwell Automation Publication 20B-IN014H-EN-P - June 2013 27
PowerFlex 700 Adjustable Frequency AC Drive – Frames 7…10
Frame 10 – Flange Mount Cutout Detail
IMPORTANT Backplate and extension are a single piece. Drive chassis can be removed from
backplate to mount in user supplied IP54, NEMA/UL Type 12 enclosure.
56.0 (2.20) *
* *
*
*
*
199.5 (7.85)
343.0 (13.50)
486.5 (19.15)
530.8 (20.90)
425.6 (16.75)
15.8 (0.62)
Ref. (0.00)
127.7 (5.03)
271.2 (10.68)
363.7 (14.32)
414.7 (16.33)
543.3 (21.39)
558.2 (21.98)
24.9 (0.98) 28.7 (1.13) 95.9 (3.77) 178.8(7.04)
328.8 (12.94) 478.8 (18.85)
14.7 (0.58) Ref
. (0.00) 93.7 (3.69) 121.1 (4.77) 253.7 (9.99) 413.8 (16.29) 507.5 (19.98) 522.2 (20.56)
*
*
*
*
* *
Fan studs are installed in alternating
directions. “ * ” indicates that the stud
points-in, all others point-out.
Enclosure Wall
Fan Stud “Pointing-In”
(Inside of Enclosure)
Fan Stud “Pointing-Out”
(Outside of Enclosure)
Dimensions are in millimeters and (inches)