Rockwell Automation 20D PowerFlex 700 Installation Instructions - Frames 7…10 - Manual (Page 29)

Rockwell Automation Publication 20B-IN014H-EN-P - June 2013 29
PowerFlex 700 Adjustable Frequency AC Drive – Frames 7…10
DC Link Choke – Frame 10
Step 3: Wire the Drive Special Considerations
PowerFlex 700 drives are suitable for use on a circuit capable of delivering up to a
maximum of 200,000 rms symmetrical amperes.
If a system ground fault monitor (RCD) is used, only Type B (adjustable) devices
can be used to avoid nuisance tripping.
12.7 (0.50)
31.8 (1.25)
222.0
(8.74)
25.4
(1.00) Dia.
2 Places 34.9 (1.38)
57.2 (2.25)
121.8 (4.80)
9.5 (0.38) Dia.
251.0
(9.90)
220.9 (8.70)
244.6 (9.63)
Top
Front Side
266.7 (10.50) Max
280.7
(11.05) 219.7
(8.65)
See Detail
280.7 (11.05)
248.0
(9.76)
305.0
(12.00)
247.7
(9.75)
11.8 (0.47)
12.7 (0.50)
7.9 (0.31)
4 PLACES
13.5 (0.53)
31.8 (1.25)
Detail
Dimensions are in millimeters and (inches)
ATTENTION: To guard against personal injury and/or equipment damage
caused by improper fusing or circuit breaker selection, use only the
recommended line fuses/circuit breakers specified on
page 41 .