Rockwell Automation 1403-DM_LM_MM Powermonitor II Instruction Sheet - Manual (Page 2)

Publication 1403-IN001A-US-P
Important User Information
Solid-state equipment has operational
characteristics differing from those of
electromechanical equipment. Safety Guidelines
for the Application, Installation, and
Maintenance of Solid-state Controllers
(Publication SGI-1.1) describes some important
differences between solid-state equipment and
hard-wired electromechanical devices. Because
of this difference, and also because of the wide
variety of uses for solid-state equipment, all
persons responsible for applying this equipment
must satisfy themselves that each intended
application of this equipment is acceptable.
In no event will Rockwell Automation be
responsible for indirect or consequential
damages resulting from the use or application of
this equipment.
The examples and diagrams in this manual are
included soely for illustrative purposes. Because
of the many variables and requirements
associated with any particular installation, the
Rockwell Automation cannot assume
responsibility or liability for actual use based on
the examples and diagrams.
No patent liability is assumed by the Rockwell
Automation with respect to use of information,
circuits, equipment, or software described in this
manual. Reproduction of the contants of this
manual, in whole or in part, without written
permission of Rockwell Automation, is
prohibited.
Throughout this manual we use notes to make
you aware of safety considerations:
Attention statements help you to:
• identify a hazard
• avoid the hazard
• recognize the consequences.
Important:Identifies information that is critical
for successful application and
understanding of the product.
!
ATTENTION: Identifies
information about practices or
circumstances that can lead ot
personal injury or death, property
damage or economic loss.