Rockwell Automation 1403-DM_LM_MM Powermonitor II Instruction Sheet - Manual (Page 32)

2-20 Installation
1403-IN001A-US-P
Communication Connections
The Powermonitor II Master Module uses a
communications connector for all Communications
Cards. This Communications Card connector allows
different communication card types to be used to
provide the appropriate protocol for a specific
system. For example, Cat. No. 1403-NSC is used for
Allen-Bradley DF-1 serial and R I/O
communications. (Refer to Publication 1403-5.1,
Smart Communications Card Instruction Sheet for
specific communication information.) Cat. No. 1403-
NENET is used for Ethernet communications. (Refer
to publication 1403-5.3, Ethernet Communications
Card Instruction Sheet for specific communication
information.) Cat. No. 1403-NDNET is used for
DeviceNet communications. (Refer to publication
1403-5.4, DeviceNet Communications Card
Instruction Sheet for specific communication
information.)
Figure 2.21 Smart Communications Card
Figure 2.22 Ethernet Communication Card
Figure 2.23 DeviceNet Communication Card