Rockwell Automation 1403-DM_LM_MM Powermonitor II Instruction Sheet - Manual (Page 44)

4-8 General Operation
1403-IN001A-US-P
Channel A
12-Cycle Oscillograph
¨
Used to select which of the seven input channels is
captured for channel A when an oscillograph is triggered. 1 = Phase 1
Voltage
2 = Phase 1
Current
3 = Phase 2
Voltage
4 = Phase 2
Current
5 = Phase 3
Voltage
6 = Phase 3
Current
7 = Phase 4
Current 1 = Phase 1
Voltage
Channel B
12-Cycle Oscillograph
¨
Used to select which of the seven input channels is
captured for channel B when an oscillograph is triggered. 1 = Phase 1
Voltage
2 = Phase 1
Current
3 = Phase 2
Voltage
4 = Phase 2
Current
5 = Phase 3
Voltage
6 = Phase 3
Current
7 = Phase 4
Current 2 = Phase 1
Current
Oscillography Type ¨ Determines whether the existing oscillograph is
overwritten or remains buffered until commanded when a
new oscillograph is triggered. 0 = Hold
1 = Overwrite 1 =
Overwrite
Number of Oscillograph
Pretrigger Cycles
¨
Indicates the number of cycles buffered prior to the trigger
of a 12-cycle oscillograph. This function can be disabled
by setting this value to -1 to improve the speed of the real
time metering update rates. -1 to 8 1
(1) Available on 1403-MM only.
Table 4.1 General Configuration
Parameter Description Range Default User
Setting