Rockwell Automation 1734-IE4S POINT Guard I/O Safety Modules User Manual - Manual (Page 78)

78 Rockwell Automation Publication 1734-UM013J-EN-P - July 2014
Chapter 5 Configure the Module in a GuardLogix Controller System
1. Right-click the POINT I/O Chassis and choose New Module.
2. From the Select Module dialog box, check Digital and Allen-Bradley.
3. Select an input module and click Create.
4. Specify the module’s general properties.
a. In the Name field of the New Module dialog box, type a unique name
for the input module.