Rockwell Automation 1734-IE4S POINT Guard I/O Safety Modules User Manual - Manual (Page 82)

82 Rockwell Automation Publication 1734-UM013J-EN-P - July 2014
Chapter 5 Configure the Module in a GuardLogix Controller System
6. Click OK to return to the Module Properties dialog box.
7. Click OK again to apply your changes.
The I/O Configuration tree displays the module.
Configure the Safety Digital Inputs
Follow this procedure to configure the safety digital inputs.
1. From the Module Properties dialog box, click the Input Configuration tab.
2 3 4
5
6
7