Rockwell Automation 1775-KA PLC-3 Communication Adapter Module User Manual - Manual (Page 31)

Installation
Chapter 2
2Ć19
The transmission format may be summarized as follows:
start bit
data bit 0
data bit 1
data bit 2
data bit 3
data bit 4
data bit 5
data bit 6
data bit 7
even parity bit (optional)
one stop bit
The 1775–KA module selects baud and parity through the LIST function
(section titled Programmable Configuration Parameters).
A number of installation parameters for the 1775–KA module can be
programmed through the PLC–3 LIST function.
The LIST function words by presenting you with a series of lists, or
menus, that allows you to select and establish the module’s operating
parameters. Each option in an upper–level menu represents a submenu of
more detailed options. This process continues until you have selected
enough options to define a single parameter in full detail. Figure 2.11
illustrates the menu structure of LIST. To return to the preceding (next
highest) level of LIST, press the ENTER key without making a new entry.
Programmable Configuration
Parameters