Rockwell Automation 1775-KA PLC-3 Communication Adapter Module User Manual - Manual (Page 33)

Installation
Chapter 2
2Ć21
You access the LIST function by typing the word LIST and press the
ENTER key. After accessing the LIST function, select option 6 MODULE
STATUS from the SYSTEM–MODE MENU. LIST then presents you
with a menu that describes the modules in your system. The menu varies
according to the modules in your PLC–3. A typical menu might be:
MODULES:
1 01 1775–ME8 A/A
2 02 1775–ME8 A/A
3 03 1775–L3 A/A
4 04 1775–S4A B/A
5 05 1775–KA A/E
6 06 1775–LX A/A
7 07 1775–LX A/A
8 08 1775–S4B B/A
9 09 1775–S4B B/A
ENTER NEXT<
Under MODULE STATUS, select the option for 1775–KA. At this point,
LIST presents you with the following menu for the 1775–KA module:
DATA HWY COMM. ADAPTER–nn
CHASSIS cc SLOT ss
1 MODULE OPTIONS
2 DATA HIGHWAY PORT
3 MODEM PORT
ENTER NEXT>
In the above and all following menus, “nn” represents the thumbwheel
setting of the 1775–KA module, “cc” represents the chassis number, and
“ss” represents the number of the chassis slot containing the module. For
more information about the LIST function, refer to Publication 1775–800,
PLC–3 Installation and Operation Manual.
Module Options
Selecting option 1 MODULE OPTIONS from the above menu (section
titled Programmable Configuration Parameters) causes LIST to present
the following menu:
KA – nn MODULE OPTIONS
1 TIMEOUT
2 SEND UNPROTECTED