Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module - Manual (Page 16)

Publication 1746-UM006B-EN-P - August 2005
1-4 Module Overview
Sequencer Mode
In the Sequencer Mode, you define a sequence of presets and a series
of corresponding output patterns. When the Accumulated Count
passes the next preset, the outputs are updated to the corresponding
pattern. In this mode, the module offers:
•
up to 24 discrete steps
•
dynamically configurable steps
•
automatic restart at the end of each sequence
•
external sequence reset control
•
ring or linear counter operation
•
input rate calculation
•
direct SLC processor control of unused outputs
Hardware Features The features of the module are highlighted below. Detailed
installation and wiring instructions are contained in Chapter 3.
HSCE
Terminal Block
Release Screws
SW2
JW1 SW1
Input and
Output Terminals
Dip Switches
1 and 2
Jumper JW1
OUTPUT INPUT
FAULT
1
2
3
4
5
6
7
0 A
B
Z
LS
Fault LED
Input Signal Status
Physical Output Status
Soft Output Status
Front View Side View