Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module User Manual
Page 79
Publication 1746-UM006B-EN-P - August 2005
Configuration and Programming 4-19
The error bit is cleared when the Function Control Bit is toggled to 0,
then back to 1.
I:e.0 Bit 11 - Configuration Error
This bit is set to 1 when a configuration error is detected. In addition,
the Configuration Error Code bits (I:e.4/0-7) are set.
This bit remains set as long as invalid configuration data exists in the
Setup and Control Word (M0:e.1).
I:e.0 Bit 12 - Reset Input
This bit is set to 1 as long as the condition specified by the Reset
Mode (M0:e.1/5-7) is true. It is reset while the condition is false.
Critical Error (bit 10)
Cause
0
No Critical Error detected
1
Critical Error detected
Configuration Error (bit 11)
Cause
0
No configuration error detected
1
Configuration error detected
Reset Input (bit 12)
Reset Mode (M0:e1/5-7) condition
0
False
1
True