Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 42)

Publication 1756-UM528A-EN-P - April 2004
4-2 Configuring the Sequence of Events Module
Overview of the
Configuration Process When you use the RSLogix 5000 software to configure a Sequence
of Events module, you must perform the following steps:
1. Add the new module to your RSLogix 5000 project.
2. Accept the default configuration or change it to specific
configuration for the module.
3. Edit configuration for a module when changes are needed.
Figure 4.1 shows an overview of the configuration process.
Figure 4.1
Select a:
• New module
• Major Revision
Configure the:
• Name
• Slot number
• Comm. format
• Minor revision
• Keying choice
Series of
Application
Specific
Screens
Make custom
configuration
choices here
Download
configuration to
owner-controller
Reconfigure module as needed via
series of screens or controller tags
Click on the Next Button to
Set Specific Configuration Click on the Finish Button to
Use Default Configuration
NEXT FINISH
Configuration complete
41058