Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 56)

Publication 1756-UM528A-EN-P - April 2004
5-4 Using the Sequence of Events Module Features
During initial module configuration, you must choose a
communication format for the module. The communication format
determines the mode in which your module operates. The example
screen below shows how to choose your module’s communication
format and, thus, operational mode.
For more information on using the Sequence of Events module in
CST Per Point mode, see Chapter 6.
For more information on using the Sequence of Events module in
FIFO mode, see Chapter 7.
Use this pull-down menu to
choose a communication format.
IMPORTANT
Once the module is created in your RSLogix 5000
project, you cannot change the communications
format without deleting the module from the project
and recreating it.