Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 43)

Publication 1756-UM528A-EN-P - April 2004
Configuring the Sequence of Events Module 4-3
Adding a New Module to
Your RSLogix 5000 Project After you have started RSLogix 5000 and created a controller, you
must add a new module to your project. The wizard allows you to
create a new module and write configuration. You can use default
configuration or write specific configuration for your application.
1. If necessary, go offline.
2. Add the Sequence of Events module to your
RSLogix 5000 project.
IMPORTANT
You must be offline when you create a new module.
If you are not offline, use this
pull-down menu to go offline
A. Right-click on I/O
Configuration.
B. Select New Module