Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 47)

Publication 1756-UM528A-EN-P - April 2004
Configuring the Sequence of Events Module 4-7
Downloading
Configuration After you write configuration for your Sequence of Events module,
the module does not use this configuration until you download it to
the owner-controller. The download transfers the entire program to
the controller, overwriting any existing program.
Download module configuration as shown below.
Depending on your application, a variety of RSLogix 5000 screens
may appear to choose a path to your ControlLogix controller and to
verify the download. Navigate those screens as best fits
your application.
This completes the download process.
Editing Configuration After you have set configuration for a module, you can review and
change your choices. You can change configuration data and
download it to the controller while online. This is called dynamic
reconfiguration.
Your freedom to change some configurable features, though,
depends on whether the controller is in Remote Run Mode or
Program Mode.
A. Click here to see the
pull-down menu.
B. Click download.
IMPORTANT
Although you can change configuration while
online, you must go offline to add or delete
modules from the project.