Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 44)

Publication 1756-UM528A-EN-P - April 2004
4-4 Configuring the Sequence of Events Module
3. When the Select Module Type screen appears, select the
Sequence of Events module.
4. Configure the module. The first screen of the configuration
wizard is shown below.
A. Select the
Sequence of
Events module.
B. Click OK.
A. Name the module.
B. Select the module’s slot number.
C. Choose a Communications Format. For
more information, see page 4-5.
D. Make sure the Minor Revision number
matches your module’s minor revision.
E. Choose an Electronic Keying method. For
more information, see page 5-13.
F. If you are altering the default
configuration, click Next. Go to page 4-6.
G. If you are using default configuration,
click Finish. Go to page 4-6.