Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 50)

Publication 1756-UM528A-EN-P - April 2004
4-10 Configuring the Sequence of Events Module
4. Add a communications module to the remote chassis.
5. Select a communications module for the remote chassis.
6. Configure the communications module in the remote chassis.
7. Add a Sequence of Events module to the remote chassis.
8. Configure the new Sequence of Events module as described
earlier in this chapter.
A. Right-click on the local
communication module.
B. Select New Module
A. Right-click on the remote
communication module.
B. Select New Module