Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 34)

Publication 1757-PM002A-EN-E - June 2006
2-24 Set Up A System
6. Click OK to use the default configuration settings as shown.
The AB-ETHIP-1 Driver should show “Running.”.
7. Close the configuration window.
8. Select Communications from the drop-down list and RSWho from
the menu.
9. Expand the AB-EtherIP-1 driver to see the devices on the network.
In this case, there are two linking devices.
What Do I Do If There’s No DHCP?
A possible cause for the lack of a DHCP is a binding socket error, in which
another application is already using the DHCP server.