Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 79)

Publication 1757-PM002A-EN-E - June 2006
Applications 4-25
Create and Schedule a Routine
1. Right-click Loop and select New Routine.
The New Routine window opens.
2. Enter >Pressure Loop< for the Name.
3. Select Function Block Diagram for the Type.
4. Click OK.
Pressure Loop is added to the Program.
5. Right-click Loop and select Properties.
6. On the Configuration tab, select Pressure Loop for the Main Routine.
7. Click Apply, then click OK.
Pressure Loop is designated the Main Routine.