Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 76)

Publication 1757-PM002A-EN-E - June 2006
4-22 Applications
9. After the downloads are complete, click the Online Monitoring button
in the Strategy window .
The real-time values are shown in the Strategy window.
The parameters that are active and good quality are displayed in green.
The parameters that are inactive or bad quality are displayed in red. The
red parameters on the FFLD LGX block are due to the lack of
communication with the ControlLogix controller.
Create a ControlLogix Control Strategy
1. Start RSLogix 5000.
From the Start menu, select Programs ⇒ Rockwell Software ⇒ RSLogix
5000 Enterprise Series ⇒ RSLogix 5000.
2. Select File ⇒ New.
Enter >PID<for the name .
Use the ‘Type:’ drop-down selector to choose the appropriate processor for
your lab hardware configuration. Also use the Revision drop-down selector
to choose the appropriate processor firmware level.
3. Your controller is added to the new project.