Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 83)

Publication 1757-PM002A-EN-E - June 2006
Applications 4-29
5. On the Parameters tab, select and deselect the Vis parameters so that
only the following parameters are selected: This exposes the desired pins
on the PIDE block.
6. Click OK.
The block is updated with your selections.
7. Click the Input Reference button .
The Input Reference is added to your sheet.
Input Parameters Output Parameters
PV CVEU
CVInitReq CVInitializing
SP
ProgOper
Auto
Manual
InstructFault