Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 58)

Publication 1757-PM002A-EN-E - June 2006
4-4 Applications
Tags cannot include a “.” (period). If a separator is needed, we suggest
using an “_” (underscore).
The HSE is added to the Project.
Define the HSE Host
This step defines your PC as the HSE Host.
1. In the Project window, right-click the HSE and select Expand.
The HSE window opens.
2. In the HSE window, right-click the HSE and select New Bridge.
The New Bridge window opens.
3. Select the following settings: give the New Bridge the Device Tag of
HOST.