Rockwell Automation 1757-FFLD Linking Device Configuration Manual User Manual
Page 88
Advertising
![background image](/manuals/579914/88/background.png)
Publication 1757-PM002A-EN-E - June 2006
4-34 Applications
The table below shows the SubStatus value on Initialization Request. Logic
needs to be built so that the value of 2 for the BKCAL_OUT from the AO
block is being monitored.
Quality
Substatus
0
BAD - the value is not useful.
X
Any
1
Uncertain - the quality of the value
is less than normal, but may still be
useful.
X
Any
2
Good NC
X
Any
3
Good Cascade - value may not be
useful for control. SubStatus carries
Back Initialization handshake.
0
NonSpecific
1
Initialization Acknowledge
2
Initialization Request
3
Not Invited
4
Not Selected
5
Reserved
6
Local Override
7
Fault State Active
8
Initiate Fault State
Advertising