Rockwell Automation 1757-FFLD Linking Device Configuration Manual - Manual (Page 57)

Publication 1757-PM002A-EN-E - June 2006
Applications 4-3
2. Click OK.
The RSFieldbus window opens.
3. Click , and select Project.
4. Enter >PID < for the name and click Save.
Save your project often to prevent loss of time and work.
The Project window opens.
Define the Server
This step defines the OPC Server and where it is located.
1. In the Project window, right-click the Fieldbus Networks icon and select
Communication Settings.
The Communication Settings window opens.
2. Verify that the settings are the same as the window above, and click OK.
Create a New HSE Network
1. In the Project window, right-click the Fieldbus Networks icon and select
New Fieldbus.
The New Fieldbus window opens.
2. Select HSE for the Type of Fieldbus.
3. Enter a tag for the Fieldbus and click OK.