Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual User Manual
Page 19
Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
19
Install Stratix 5900 Services Router
Chapter 2
Connect a Personal
Computer, Server, or
Workstation
To connect a computer (or other Ethernet devices) to an Ethernet switch port,
follow these steps.
1. Connect one end of the Ethernet cable to an Ethernet switch port on the
router.
2. Connect the other end of the cable to the RJ45 port on the network
interface card (NIC) that is installed in the personal computer, server, or
workstation.
3. (Optional) Connect additional servers, personal computers, or
workstations to the other Ethernet switch ports.
1
Ethernet cable
2
Ethernet port on the router
3
RJ45 Port on the computer
32445-M
RESET
SERIAL
CON / AUX
GE WAN 0
FE 1
S
L
FE 0
S
L
FE 3
S
L
FE 2
S
L
S
L
SYS
ACT
LAN
1
3
2