Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 32)

32 Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
Chapter 3 Configure the Stratix 5900 Services Router
Obtain an IP Address in Microsoft Windows 7
If you are running Windows 7 software version, follow these steps to open the
Internet Protocol TCP/IP Properties dialog box and obtain an IP address
automatically.
a. Choose click Start > Control Panel > Network and Sharing Center.
b. Click Change Adapter Settings.
c. Right-click Local Area Connection.
d. Click Properties.
e. On the Networking tab, select Internet Protocol Version 4 (TCP/
IPv4).
f. Click Properties.
g. Click Obtain an IP address automatically.
h. Click OK.