Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 34)

34 Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
Chapter 3 Configure the Stratix 5900 Services Router
Getting Started with Stratix
5900 Device Manager
Software Stratix Device Manager software lets you quickly configure router connections.
The software is a lite version of Stratix Configurator software program. The
factory installs the software into the router’s nonvolatile memory. You access the
software on the router by using a browser window and an IP address.
After you use Stratix Device Manager software to give the router basic
configurations such as a router name, username, and passwords, you can use
Stratix Configurator software for more complex configurations. Other
configurations include WAN and LAN interfaces, static routes, DNS, DCHP,
hostname, CNS server, configure IOS CLI, and perform basic troubleshooting
by using ping and traceroute.
With Stratix 5900 Device Manager software, you can set these configuration
parameters for the router.
• Local Area Network (LAN) configuration
• DHCP Server Configuration
• Wide Area Network (WAN)
• Firewall
• Security Settings
• Router Provisioning
Both programs are Rockwell Automation’s versions of the Cisco software
programs, Configuration Express and Configuration Professional.
Stratix Device Manager Software Functions
These are the functions that are available in the device manager software.
Table 4 - Stratix Device Manager Parameter Descriptions
Item Description
Interfaces and connections Configure all device interfaces including LAN and WAN interfaces. Setup DSL, Ethernet
or 3G WAN links or create Vlans and Loopback interfaces to configure interface
attributes.
DHCP/DNS/Hostname Configure the device hostname, domain name, DNS server and IPv4 DHCP Pools.
User Management Configure new Users on the device with specified privilege levels.
Static Routing Configure IPv4 and IPv6 static routes.
Dashboard View basic router diagnostic information including router version, interfaces, software
version along with nonvolatile memory and cpu utilization statistics.
Plug and Play Server Setup the Plug and Play Server to automatically configure the device.
Troubleshoot Troubleshoot reachability to other IPv4 or IPv6 destinations with Ping or Traceroute
utilities.
Configure CLI Configure IOS CLI commands, run show commands and manage the End User View.