Rockwell Automation 1783-SR Stratix 5900 Services Router User Manual - Manual (Page 81)

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013 81
Configure the Stratix 5900 Services Router by Using CISCO IOS Command-line Interface (CLI) Chapter 4
3 2279424 Apr 15 2008 20:34:54 +00:00
cpexpress.tar
Router#
4. Enter the copy flash: nvram: command, as shown in this example.
Router# copy flash:cpconfig-8xx.cfg nvram:
This copies the default configuration file to router NVRAM,
When the default configuration file is in NVRAM, it becomes the router
startup configuration.
5. Enter the copy startup-config running-config command, as shown in this
example.
Router# copy startup-config running-config
This makes the new startup configuration the running configuration, so
that the router can support Stratix Configurator software.